BMW 3 Series Head Unit Upgrade Guide | TEYES

Start a BMW 3 Series head unit upgrade with the chassis code and the original infotainment setup. The E90 saloon, E91 Touring, E92 coupé and E93 convertible are grouped on the CC4 Pro listing. The separate LUXONE listing also covers certain F30 and F31 configurations. Match the dashboard and factory system before selecting a kit.

BMW E90, E91, E92 and E93, 2005–2013

The CC4 Pro listing below shows the E9x dashboard and two storage options. Compare the complete centre stack and tell us whether the car has a factory screen and iDrive controller. Send a photo of the radio, climate controls and controller area so the fascia and interface can be checked together.

TEYES CC4 Pro for the listed BMW 3 Series E9x dashboard. Select the photo to view the kit.

BMW F30 and F31 with iDrive

The separate LUXONE listing offers different variants for the original BMW system and driving side. It includes right- and left-hand-drive F30 NBT options. Identify the factory interface and match the exact variant. Ask TEYES to check the fitment if the original system has already been changed.

TEYES LUXONE listing for selected BMW E9x and F30 or F31 configurations. Select the photo to view the kit.

Watch the BMW F30 and F31 walkthrough

This TEYES Australia walkthrough shows LUXONE in the F30/F31. Use it to compare that dashboard and interface.

Watch TEYES LUXONE BMW 3 Series F30 and F31 installation on YouTube

Check original BMW audio, controls and alerts

Tell us whether your BMW has premium audio, a factory camera or parking sensors. Confirm how the kit handles the iDrive controller, steering controls, factory audio and parking alerts. With the car safely parked, test the functions you use before refitting the trim. If the build falls outside either listing, request a separate fitment check.

Ask TEYES to check your BMW 3 Series fitment · Factory feature retention checklist · Find a TEYES installer