CC4 Pro Digital 360 Camera Guide
The TEYES CC4 Pro Digital 360 camera kit combines front, rear and side camera feeds into a surround view on the head unit. It can help you check kerbs, parking lines and the space next to the vehicle when manoeuvring slowly.
Which 360 camera package fits my TEYES head unit?
Choose CC4 Pro Digital 360 for a compatible CC4 Pro configuration. Choose CC4 Pro 360 + ADAS if you want the six-camera package with compatible driver-assistance features. The standard CC4 uses its own analogue AHD surround-view kit. The CC4L does not support 360° surround view.
Check the exact head unit and variant before ordering. The CC4 Pro Digital 360 setup needs a non-AK configuration and cannot be combined with the separate digital front and rear setup supplied with AK variants. For 12.3-inch models, check the dedicated accessory compatibility guide.
What do the overhead and 3D views show?
The overhead view stitches the camera feeds into a picture of the area around the vehicle. The 3D view presents the same surroundings from another angle. Camera position, vehicle dimensions and calibration affect how well the feeds join. Use the views alongside your mirrors and direct observation.
How do I activate and check CC4 Pro Digital 360?
- Install the compatible kit and connect the head unit to the internet.
- On the head unit, go to Settings → Display and set the reverse camera to 360 Mode.
- Use the unique activation code supplied with your kit when prompted.
- Follow the calibration procedure for your kit, then check each feed and the stitched image with the vehicle stationary.
If a feed is missing, check the camera connections and package compatibility. If all feeds work but parking lines jump at the edges, have the calibration checked. Keep your activation code private when requesting support.
Open the CC4 Pro activation instructions · Compare camera packages · Find a TEYES installer