Toyota Prado 2017–2023 head unit upgrade guide | TEYES CC4 Pro

by TEYES Australia November 5, 2026

Include the switches on both sides of the radio in your dashboard photo. For a 2017 or 2021–2023 Prado, request a separate fitment check.

Kit covered in this guide
TEYES CC4 Pro for 150 Series 2018–2020

Which late Prado dash do you have?

A 2017 registration or a 2020 build is a starting point. Look at the Toyota radio face first: note the buttons beside the screen, the vents above it and the clock or switches below. The CC4 Pro listing identifies a 2018–2020 configuration and shows several original radios. Match yours against those photos before selecting the harness.

Factory Prado radio with the surrounding air vents visible.

Does the original 360° view carry over?

TEYES lists factory 360° support for the matched configuration. In a parked vehicle, have the installer demonstrate the view selector and the transition back to audio after reverse. The product notes also flag a vehicle-specific CAN bus software issue affecting the gear-selector lights. Check those lights at handover and consult support before changing the CAN bus software.

Another Toyota radio face shown in the Prado fitment notes. Compare its side buttons with yours.

Watch the dashboard walkthrough

Prado 150 dashboard reference, 2017–2021 · TEYES Australia

The CC4 Pro kit

TEYES CC4 Pro product photo for 150 Series 2018–2020.

Compare the kit photos and select your configuration. For a fitment check, include your build month, trim level, factory audio system and a straight-on dashboard photo.