Yamaha Aftermarket Radio Pinouts
Match the model and connector orientation to your radio. Verify the battery, accessory and ground circuits before applying power.
Yamaha YCR-325S
Lower power and speaker connector
The source illustration also shows a smaller line-out and antenna block. The table covers the main power and speaker contacts. Position labels are added for this guide. Unlabelled circuits in the source have no assignment here.
| Position | Circuit shown on reference |
|---|---|
| A1 | BATT |
| A2 | ANT |
| B1 | GND |
| B2 | ACC |
| C1 | LF+ |
| C2 | LR+ |
| D1 | LF− |
| D2 | LR− |
| E1 | RF+ |
| E2 | RR+ |
| F1 | RF− |
| F2 | RR− |
Yamaha YM-1050EQ
Main connector
The diagram overlaps several speaker labels at the right end. Those assignments remain unconfirmed. Position labels are added for this guide. Unlabelled circuits in the source have no assignment here.
| Position | Circuit shown on reference |
|---|---|
| A1 | ANT |
| A2 | LINE-L+ |
| A3 | LINE-R+ |
| A5 | ACC |
| A7 | LR+ |
| A9 | LR− |
| B1 | BATT |
| B2 | LINE-L- |
| B3 | LINE-R- |
| B5 | GND |
| B7 | RF+ |
Yamaha YM-1250KC
Main connector
The source shows shared paths without an unambiguous return label. Those contact assignments are omitted. Position labels are added for this guide. Unlabelled circuits in the source have no assignment here.
| Position | Circuit shown on reference |
|---|---|
| A1 | ANT |
| A2 | NC |
| A3 | LINE-L |
| A4 | LINE-R |
| A7 | CD-L |
| A8 | CD-R |
| A9 | LF |
| A10 | LR |
| B1 | BATT |
| B2 | GND |
| B4 | ACC |
| B5 | NC |
| B6 | LR− |
| B7 | LR+ |
| B9 | RR− |
| B10 | RR+ |
Yamaha YM-9600
Main connector
The reference prints overlapping speaker labels in the centre. The overlapping assignments are omitted. Position labels are added for this guide. Unlabelled circuits in the source have no assignment here.
| Position | Circuit shown on reference |
|---|---|
| A1 | ANT |
| A3 | LR+ |
| A5 | LF− |
| A9 | ANT |
| A10 | BATT |
| B1 | ANT-GND |
| B3 | RR+ |
| B5 | RF− |
| B9 | ACC |
| B10 | GND |
Yamaha YM-9900RC
Main connector
Position labels are added for this guide. Unlabelled circuits in the source have no assignment here.
| Position | Circuit shown on reference |
|---|---|
| A1 | ACC |
| A2 | BATT |
| A3 | RR− |
| A4 | LR− |
| A5 | LF− |
| A6 | RF− |
| B1 | GND |
| B2 | ANT |
| B3 | RR+ |
| B4 | LR+ |
| B5 | LF+ |
| B6 | RF+ |