Chrysler OEM Head Unit Pinouts

Verification status is shown for each entry. Use the factory wiring and connector end view for the exact vehicle build, radio sales code and equipment. The numbered cavity indexes list cavity IDs only. Use the factory end view to identify the terminal positions, keying and viewing side.

Chrysler (2002-2009), Dodge, Jeep Head Units

Verification. The 2006 Jeep Liberty KJ C1 and C2 tables cover that vehicle harness. Other models, years and radio part numbers still require a factory connector and wiring match.

The factory parts catalogue identifies 05091601AE as a RAD radio for the 2005 Liberty KJ. The tables show the 2006 Liberty KJ vehicle harness as a documented example of the PCI configuration. Other listed radios and builds require an exact part and harness match.

2006 Liberty KJ · radio C1

2006 Liberty KJ radio C1 · 22-way vehicle connector, shown in the orientation of the Mopar installation drawing. Upper row 12–22, lower row 1–11, latch below. Simplified housing outline.

Cavity	Function	Wire colour
1	Fused battery	RD
2	Run / accessory	PK/YL
3	Panel illumination	OR/BR
7	Front right +	GY
8	Front right −	GY/BR
9	Front left −	DG/BR
10	Front left +	DG
11	Ground	BK/LG
12	Fused battery	RD
13	Antenna relay output with radio choke	YL/RD
14	PCI data	WT/VT
18	Rear left +	DG/DB
19	Rear left −	DG/OR
20	Rear right −	GY/OR
21	Rear right +	GY/DB
22	Ground	BK/LG

2006 Liberty KJ · radio C2

10-way connector family reference. Check the molded cavity numbers and keying against the installed connector before wiring.

Cavity	Function	Wire colour
1	Right audio	GY/WT
2	Shield	GY/OR
3	Audio return	GY
4	PCI data	WT/VT
5	Run / accessory, base	DG/GY
5	Run / accessory, other audio	LG/GY
6	Left audio	DG/WT
7	Ground	BK
10	Fused battery	GY/YL

Chrysler (2003-2010), Dodge, Jeep 22 pin car stereo connector

Verification. The generic 22-way wiring map lacks an exact vehicle build and matching factory connector end view.

The reference flags this generic pinout as uncertain. Apply only to the matching PCI-bus configuration after vehicle-specific verification.

22-way

22-way vehicle harness connector reference. Upper row 12–22, lower row 1–11, latch below. Simplified housing outline. Match the cavity numbers and keying on the vehicle.

Cavity	Signal	Notes
1	+12V	Battery constant
2	+12V	ACC ignition
3	Panel lamps driver
7	Right front speaker +
8	Right front speaker -
9	Left front speaker -
10	Left front speaker +
11	Chassis / Ground -
12	+12V	Battery constant
13	+12V	Radio output
14	PCI bus	SAE J1850 VPW communication bus
18	Left rear speaker +
19	Left rear speaker -
20	Right rear speaker -
21	Right rear speaker +
22	Chassis / Ground -

Chrysler (2005-2007), Dodge, Jeep Radio Car Stereo

Verification. Vehicle model, equipment and factory connector end views still need to be matched for these radio tables.

22-way · Main radio

22-way vehicle harness connector reference. Upper row 12–22, lower row 1–11, latch below. Simplified housing outline. Match the cavity numbers and keying on the vehicle.

Cavity	Wire colour	Signal	Notes
1	GY/LG	FUSED B(+) (I.O.D.)
2,3	-	-
4	DG/OR	LEFT AUDIO OUTPUT	HANDS FREE
5	WT/OR	CAN B BUS (+)
6	0WT	CAN B BUS (-)
7	DG/VT	RIGHT FRONT DOOR SPEAKER (+)	LOWLINE/MIDLINE I
8	DG/YL	RIGHT FRONT DOOR SPEAKER (-)	LOWLINE/MIDLINE I
9	GY/YL	LEFT FRONT DOOR SPEAKER (-)	LOWLINE/MIDLINE I
10	GY/VT	LEFT FRONT DOOR SPEAKER (+)	LOWLINE/MIDLINE I
11	BK/LG	GROUND
12	GY/LG	FUSED B(+) (I.O.D.)
13,14,15	-	-
16	DG/YL	RIGHT AUDIO OUTPUT	HANDS FREE
17	DG	COMMON AUDIO OUTPUT	HANDS FREE
18	DG/TN	LEFT REAR SPEAKER (+)	LOWLINE/MIDLINE I
18	DG/DB	RADIO LEFT AUDIO (+)	MIDLINE II/HIGHLINE
19	DG/GY	LEFT REAR SPEAKER (-)	LOWLINE/MIDLINE I
19	DG/OR	RADIO LEFT AUDIO (-)	MIDLINE II/HIGHLINE
20	YL/GY	RIGHT REAR SPEAKER (-)	LOWLINE/MIDLINE I
20	GY/OR	RADIO RIGHT AUDIO (-)	MIDLINE II/HIGHLINE
21	DG/BR	RIGHT REAR SPEAKER (+)	LOWLINE/MIDLINE I
21	GY/DB	RADIO RIGHT AUDIO (+)	MIDLINE II/HIGHLINE
22	BK/LG	GROUND

10-way · Auxiliary audio

10-way connector family reference. Check the molded cavity numbers and keying against the installed connector before wiring.

Cavity	Wire colour	Signal
1	DG/YL	AUDIO SIGNAL RIGHT (+)
2	DG	AUDIO SIGNAL COMMON
3	-	-
4	DG/LB	DVD AUDIO RIGHT (+)
5	GY/OR	AUX AUDIO COMMON
6	DG/OR	AUDIO SIGNAL LEFT (+)
7	GY/DG	DVD AUDIO COMMON
8	GY/LG	DVD AUDIO LEFT (+)
9	GY/LB	AUX AUDIO LEFT (+)
10	GY/DB	AUX AUDIO RIGHT (+)

Dodge (2014-2016), Jeep, VP4 NA 52-pin Head Unit connector

Verification. The secondary VP4 pin assignments are disputed. Hold wiring until the vehicle, radio sales code and 52-way factory connector documentation agree.

The reference reports a discrepancy for this VP4 variant. Verify the exact sales code, connector and vehicle service diagram. The Charger and Cherokee entries below provide vehicle-specific references.

52-way

52-way radio-side connector reference. Cavity 1 is at the lower right. Match the housing keys and molded cavity numbers to the radio. Circuit assignments depend on the vehicle build and sales code.

Cavity	Signal	Option	Wire colour
1	CAN_C(+) COM HEAD Module	RA3 RA4 RG3 RG4 RJ3 RJ4	GY
2	CAN_I(+) AUDIO		DB
3	AUTOMATED COLLISION NOTIFICATION SIGNAL	RS7	LB/VT
6	AUX AUDIO RT		LG/LB
7	AUX AUDIO REFERENCE		LG/DB
8	CD CHANGER AUDIO RT SIG	WITH CD-RH1	GY/WT
8	AUDIO RT 3	WITH REAR SEAT ENTERTAINMENT - XRV	DG/YL
9	CD CHANGER AUDIO GND	WITH CD-RH1	GY/OR
9	AUDIO RTN 3	WITH REAR SEAT ENTERTAINMENT - XRV	GY/LB
10	CD CHANGER AUDIO LT SIG	WITH CD-RH1	DG/WT
10	AUDIO LT 3	WITH REAR SEAT ENTERTAINMENT - XRV	DG/VT
11	CAN_C(-) COM HEAD MODULE	RA3 RA4 RG3 RG4 RJ3 RJ4	YL
12	CAN_I(-) AUDIO		WT
16	AUX AUDIO LT		LG/TN
17	AUX CONNECTION DETECT		LG/YL
24	VIDEO SIG 2	WITH REAR SEAT ENTERTAINMENT - XRV	GY/LB
25	VIDEO COM 2	GY/YL
26	VIDEO SHIELD 2	DG/BR
27	PASS TO RADIO AUDIO RT	RA1 RJ1 RG1 WITH RSP/RSQ	OR/LB
29	HANDS FREE MICROPHONE IN (-)	ALL EXCEPT RA1 RJ1 RG1	LB/DG
30	HANDS FREE MICROPHONE IN (+)	DG/LB
31	REAR CAMERA SIG	DG/BR
32	REAR CAMERA SIG RTN	DG/OR
33	REAR CAMERA SHIELD	DG/WT
36	PASS TO AUDIO REFERENCE	RA1 RJ1 RG1 WITH RSP/RSQ	OR/DB
37	PASS TO RADIO AUDIO LT	RA1 RJ1 RG1 WITH RSP/RSQ	OR/TN
39	HANDS FREE MICROPHONE 2 IN (-)	ALL EXCEPT RA1 RJ1 RG1	LB/TN
40	HANDS FREE MICROPHONE 2 IN (+)	LB/DG
43	GND GENERIC		BK
44	GENERIC BATT FEED		RD
45	RADIO TO AMP (+) RR RT	with external amplifier	GY/DB
45	DOOR SPEAKER (+) RR RT	without external amplifier	DG/LG
46	RADIO TO AMP (+) FT RT	with external amplifier	GY
46	DOOR SPEAKER (+) FT RT 1	without external amplifier	DG/VT
47	RADIO TO AMP (+) FT LT	with external amplifier	DG
47	DOOR SPEAKER (+) FT LT 1	without external amplifier	GY/VT
48	RADIO TO AMP (+) RR LT	with external amplifier	DG/DB
48	DOOR SPEAKER (+) RR LT	without external amplifier	GY/LG
49	RADIO TO AMP (-) RR RT	with external amplifier	GY/OR
49	DOOR SPEAKER (-) RR RT	without external amplifier	DG/GY
50	RADIO TO AMP (-) FT RT	with external amplifier	GY/BR
50	DOOR SPEAKER (-) FT RT 1	without external amplifier	DG/YL
51	RADIO TO AMP (-) FT LT	with external amplifier	DG/BR
51	DOOR SPEAKER (-) FT LT 1	without external amplifier	GY/YL
52	RADIO TO AMP (-) RR LT	with external amplifier	DG/OR
52	DOOR SPEAKER (-) RR LT	without external amplifier	GY/DG

Dodge, Jeep, Ram (2008-2009) Premium Radio

Verification. The P05091164AA listing is marked untested. The radio sales code, corresponding vehicle build and connector end views remain to be verified.

P05091164AA

The source lists this map as untested. Confirm the radio sales code and the vehicle equipment before wiring.

22-way · Main radio

22-way · Main radio. Connector family photo. Match the keying and molded cavity numbers to the installed unit before using the pin table.

Cavity	Wire colour	Signal
1	YEL/RED	Fused B(+)
2	WHT/ORG	CAN Interior Bus(-)
8	DK GRN/DK BLU	AMP LR Speaker(+)
9	DK GRN/ORG	AMP LR Speaker(-)
10	GRY/DK BLU	AMP RR Speaker(+)
11	GRY/ORG	AMP RR Speaker(-)
12	BLK	Ground
13	WHT/GRY	CAN Interior Bus(+)

10-way · Microphone

10-way connector family reference. Check the molded cavity numbers and keying against the installed connector before wiring.

Cavity	Wire colour	Signal
1	LT BLU/DK GRN	Microphone 2 IN(+)
2	DK GRN/LT BLU	Microphone 1 IN(+)
4	DK GRN/YEL	Microphone Feed
7	LT BLU/WHT	Microphone IN(-)
8	ORG/GRY	SENS GND

22-way · Camera and video

White MyGIG radio C3 connector reference, shown for the 2008–2010 Grand Cherokee WK. The Mopar camera installation drawing identifies cavities 3, 4 and 5 as camera signal, return and shield. Verify the exact radio and harness before applying the full table.

Cavity	Wire colour	Signal
1	GRY/LT BLU	VDO-Audio Return 3
3	GRY/ORG	Camera SIG
4	GRY/LT BLU	Camera Return
5	NCA	Camera SHLD
6	GRY/ORG	VDO-Video SIG 1
7	GRY/LT BLU	VDO-Video Common 1
8	NCA	VDO-Video SHLD 1
9	GRY/ORG	VDO-Video SIG 2
10	GRY/LT BLU	VDO-Video Common 2
11	NCA	VDO-Video SHLD 2
12	GRY/ORG	VDO-Audio Return 2
13	DK GRN/VIO	VDO-Audio Left 3
14	DK GRN/YEL	VDO-Audio Right 3
18	DK GRN/TAN	VDO-Audio Left 1
19	GRY/VIO	VDO-Audio Return 1
20	DK GRN/WHT	VDO-Audio Right 1
21	DK GRN/LT BLU	VDO-Audio Left 2
22	DK GRN/DK BLU	VDO-Audio Right 3

Chrysler Town&Country 2014 Premium Radio

Verification. The main 22-way connector face is cross-checked against the model-specific iDatalink installation guide. The complete circuit table and the camera, microphone and USB connector end views still need factory verification.

22-way · Main radio

Main radio connector, vehicle-harness mating face. Simplified cavity arrangement from the iDatalink Maestro Town & Country 2012–2016 installation guide, figure 2.1. Cavities 19–22 are unpopulated in the factory-amplified configuration covered by that guide.

Cavity	Wire colour	Signal
1	YEL/RED	Fused B+
2	WHT/ORG	CAN IHS BUS(-)
8	DKGRN/DKBLU	RAD LR(+)
9	DKGRO/ORG	RAD LR(-)
10	GRY/DKBLU	RAD RR(+)
11	GRY/ORG	RAD RR(-)
12	BLK	Ground
13	WHT/GRY	CAN IHS BUS(+)

22-way · Camera and video

Plug face unverified. This index lists cavity IDs. Confirm their physical positions, housing keying and viewing side in the model-specific factory connector end view before wiring.

Cavity	Wire colour	Signal
1	GRY/LT BLU	Audio Return 3
3	GRY/ORG	Camera SIG
4	GRY/LT BLU	Camera Return
5	NCA	Camera SHLD
6	GRY/ORG	VSIG 1
7	GRY/LT BLU	Vcommon 1
8	NCA	VSHLD 1
9	GRY/ORG	VSIG 2
10	GRY/LT BLU	Vcommon2
11	NCA	VSHLD 2
12	GRY/ORG	Audio Return 2
13	DK GRN/VIO	Audio Left 3
14	DK GRN/YEL	Audio Right 3
18	DK GRN/TAN	Audio Left 1
19	GRY/VIO	Audio Return 1
20	DK GRN/WHT	Audio Right 1
21	DK GRN/LT BLU	Audio Left 2
22	DK GRN/LT BLU	Audio Right 2

10-way · Mirror microphone

Plug face unverified. This index lists cavity IDs. Confirm their physical positions, housing keying and viewing side in the model-specific factory connector end view before wiring.

Cavity	Wire colour	Signal
1	LT BLU/DK GRN	Microphone 2 IN(+)
2	DK GRN/LT BLU	Microphone 1 IN(+)
4	DK GRN/YEL	Microphone Feed
7	LT BLU/WHT	Microphone IN(-)
8	ORG/GRY	SENS GND

5-way · USB, except Limited

Plug face unverified. This index lists cavity IDs. Confirm their physical positions, housing keying and viewing side in the model-specific factory connector end view before wiring.

Cavity	Wire colour	Signal
1	NCA	USB Pwr
2	NCA	USB Data-
3	NCA	USB Data+
5	NCA	USB GND

Chrysler Pacifica (2004-2008) 6-CD DVD Player · C2 cavity 9 note

Wiring note for the 2005 Pacifica. The factory manual gives two descriptions for circuit X960. The DVD/CD changer table calls C2 cavity 9 the headphone audio return, while the DVD screen table identifies X960 as the right headphone audio signal. Confirm the circuit on the vehicle before connecting cavity 9. The physical connector end views and applicability to other model years still need confirmation.

p/n P04685908AF

2005 Pacifica factory DVD/CD changer connector assignments. Match the changer and equipment before applying to other years.

C1 · DVD/CD changer

Plug face unverified. This index lists cavity IDs. Confirm their physical positions, housing keying and viewing side in the model-specific factory connector end view before wiring.

Cavity	Circuit	Signal
1	A118 RD/OR	Fused battery
3	E14 OR/TN	Panel illumination
8	X40 GY/WT	Right audio out
9	Z530 GY/BK	Ground
11	X112 DG/GY	Run/accessory
12	D25 WT/VT	PCI data
15	X140 GY/OR	Audio common
16	X41 DG/WT	Left audio out

C2 · DVD/CD changer

Plug face unverified. This index lists cavity IDs. Confirm their physical positions, housing keying and viewing side in the model-specific factory connector end view before wiring.

Cavity	Circuit	Signal
1	X515 GY/OR	Video signal
2	X915 GY/LB	Video control
3	X961 GY/OR	Left headphone audio
4	X963 WT	Infrared headphone enable
5	X211 YL/GY	Run/accessory
6	X114 GY/TN	Fused battery
7	X955	Shield
8	X962 DG/WT	Headphone return
9	X960 GY/WT	X960 function disputed in the factory manual. Confirm against the vehicle schematic.
10	X555 VT/OR	Video play
11	—	Unused
12	X530 GY/DB	Video return

Back to Technical Portal